Clear Silicone Gasket

Clear Silicone Gasket 1)Formula USA 2)MSDA/SONCAP/SASO/ISO/CE/... 3)OEM/ODM Service 4)Top-10 Suppliers

Clear Silicone Gasket

one-part, non-slumping, acetate-curing rubber paste that cures to a permanently flexible silicone rubber on exposure to atmospheric moisture at room temperature. It is permanently flexible andstable at temperatures from -76°F to 536°F (-60°C to 280°C). It is also highly resistant to oil, water, weather, vibration and grease. Ideal application for valve covers, oil pans, timing covers, water pumps, thermostat housings, intake manifold and seals.Typical application: drive housings, exhaust manifolds, thermostat housings, valvecovers, water pumps, different covers

 

Instructions for use:1, first remove dirt, grease, moisture, and the old filler, if the gap is greater than the required fill of 1.2X1.2 cm.2, cover with masking tape on both sides adjacent to the interface.3, according to the size of the required 45-degree angle cut strips nozzle. Put the gun in the hose, the nozzle into the joints, 45 degrees out of sealant fill the gap, temperature should be higher than 5 °C.4, torn masking tape immediately after the smooth, tightly closed lid.5, first hand, and tools and then wipe clean. 30 minutes after the sticky, usually within 24 hours fully cured.6, note that the measures taken to protect the eyes, in the ventilation construction, away from children.

Properties:

Appearance	Pure paste, smooth, homogeneity
Density (g/cm3)	1.05 ~ 1.30
Nonvolatile Content (%)	≥ 96
Out of (ml / min)	55
Dry time (min)	5 ~ 22
Shore hardness (W)	30 ~ 60
Tensile Strength (Mpa)	2.0
Elongation (%)	400
Sealing pressure (Mpa)	10
Resistant to all kinds of lubricating oil, gear oil, engine oil	excellent
sag	0
Temperature	-40 °C ~ 445 °C

Clear Silicone Gasket