all purpose anti rust lubricant

all purpose anti rust lubricant 1.Anti Rust Lubricant 2.Penetrating Oil 3.anti-rust, lubricating, dehumidifying, decontamin

All purpose anti rust lubricant 

Function

1, anti-rustRust remover and metal surface have a strong affinity, and highly permeable (greater than water), able to penetrate into the pores within the metal, will exclude moisture and water to form a dense layer of only 0.0025-0.0076 mm protective film to keep out moisture and air to achieve the long-term anti-corrosion effect.

2 DehumidificationRust Remover permeability strong (stronger than water), and with excellent affinity for the metal surface, which can penetrate into the pores within the metal to form a dense layer of protection only 0.0025-0.0076 mm film, effectively ruled out metal surface and the pores within the water and moisture.

3, the solution of rustRust Remover permeability strong, able to penetrate to the metal surface and internal pores, but also for rust and other corrosive particles precipitate with excellent solubility, can break the bond between its particles, so that easily rust and other sediment off.

4, lubricationRust can be uniformly distributed in the metal surface, remove the metal link between the noise components, to maintain its flexible operation. Proud of is the product sticky ash, it is not silicon, chlorofluorocarbons and other substances likely to stick ash, which can be attached to the metal surface to maintain long-term lubrication.

5, cleaningRust Remover is highly permeable and drainage, to completely remove the adhesive surface of the metal grease, dirt, dust and other attachments. Although the permeability of a strong product, but the paint for metal, fiber, nylon and other plastic materials no harm.

6, the conductanceRust Remover is a highly insulator itself, but it can eliminate electrical contacts on the device caused by the film due to oxidation or impurities, to promote smooth and steady current

Usage:

1.use steel brush, cleaning brush off rust.

2.use hammer rap the rust parts.

3.spray the anti-rust and lubricant to the parts need loosen rust.

4.wait 20-30 minutes, dissolve the rust.

Typical physical properties 

boiling point	>100°C
specific gravity	0.6032
vapour density	Is heavier than air
evaporation velocity	>1 (Butyl Acetate=1)
stability	Stable

all purpose anti rust lubricant